Flowering is all finished across all counties of Maryland now, except for a
few late planted fields in the northern part of MD that may still be
flowering. Currently the risk of FHB is low in these areas. For most parts,
wheat is now in the grain filling stage. With the showers that we had at
flowering, if you had a susceptible variety planted and missed application
of fungicides at the correct time, there are high chances of substantial
Fusarium Head Blight incidences. Consequently, tombstones (shriveled scabby
kernels) and DON content may be a concern for the growers. To assess the
incidence of FHB, you may randomly pick 20-25 heads of wheat per 1-2 acres
and count the spikes having bleached spikelets. Fields with high incidence
rates should be harvested separately from those with lower incidences.
Harvesting from fields with high levels of FHB incidence should be done with
higher fan speeds to remove lighter tombstone kernels. The farmers are
advised to get the DON content analyzed in the grain before taking it to the
market.
--Nidhi Rawat, Small grains Pathologist, University of Maryland
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
With many fields flowering now across the state, infection risk remains high
in several areas. Scattered showers and storms over the weekend kept
moisture levels up in localized regions. If a spray window presents itself,
fungicide is advised.
--Alyssa Collins, Extension Field Crops Pathologist, Penn State University
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat in the North-western counties (Frederick, Howard, Carroll, Harford
counties) of the state is flowering currently. The FHB risk across the state
continues to be high, so if your wheat is flowering, it’s recommended to
spray fungicides for managing FHB. The best stage for spraying fungicides is
early flowering or within 4-5 days of that. The fungicides effective for FHB
are Prosaro/ Caramba/ Miravis-Ace. All of these fungicides are pre-mixed and
do not need to be tank mixed with any other product for spraying. Read the
label carefully for recommended rates and harvest restriction times.
Strobilurin containing fungicides should not be sprayed at this stage.
Aerial application at a rate of 5 gallons per acre or ground application at
15 gallons per acre with 300-350 um droplet size is recommended. Spray
nozzles should be angled at 30°-45° down from horizontal, toward the grain
heads, using forward- and backward mounted nozzles or nozzles with a two
directional spray, such as Twinjet nozzles. Wheat in the Eastern shore is
already past the stage for both FHB infection and fungicide spray.
--Nidhi Rawat, Small grains Pathologist, University of Maryland
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Despite a window of lovely weather Friday, infection risk remains high
across PA. Please monitor your crop development and consider a fungicide at
flowering.
--Alyssa Collins, Extension Field Crops Pathologist, Penn State University
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat in lower Delaware has finished flowering and wheat in Kent and New
Castle counties range from head emergence through flowering. The entire
state is at high FHB risk. If your wheat is flowering (yellow anthers
visible on 50% of main tillers), it is advised to make a fungicide
application for management of FHB. The advised window for fungicide
application is flowering until 4-5 days after flowering. Fungicides for FHB
include Caramba, Miravis-Ace, and Prosaro. Fungicides containing
strobilurins should be avoided at this growth stage. Applications should be
made at the full recommended rate in 15 gallons per acre (gpa) with 300-350
um droplet size for ground application and 5 gpa recommended for aerial
application. Spray nozzles should be pointed toward the grain heads (30-45°
angle from horizontal), with forward and backward mounted nozzles or nozzles
with a two directional spray (Twinjet).
--akoehler, Extension Plant Pathologist, University of Delaware
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat in the Eastern shore has finished flowering, except for a few late
planted fields. Up in the north, wheat is anywhere from head emergence to
beginning of flowering. The FHB risk for Maryland is high across the state.
If your wheat is flowering (50% of the main tillers showing yellow anthers),
it is advised to spray fungicides for scab. The best stage recommended for
spraying fungicides is early flowering or within 4-5 days of that. The
fungicides effective for FHB are Prosaro/ Caramba/ Miravis-Ace. These
fungicides do not need to be tank mixed with another product for spraying.
The fungicide products should be applied at the full rate recommended by the
manufacturers. Strobilurin containing fungicides should not be sprayed at
this stage. Aerial application at a rate of 5 gallons per acre or ground
application at 15 gallons per acre with 300-350 um droplet size is
recommended. Spray nozzles should be angled at 30°-45° down from
horizontal, toward the grain heads, using forward- and backward mounted
nozzles or nozzles with a two directional spray, such as Twinjet nozzles.
--Nidhi Rawat, Small grains Pathologist, University of Maryland
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
The majority of PA is under high scab infection risk this week. This risk
will persist as long as conditions remain damp. If your wheat will be
flowering in the next several days, be prepared to target a fungicide
application at early flower. If leaves dry sufficiently to allow for
application but more rain is threatening, know that most of the scab
products become rainfast very shortly after application (even within 15
min), and so you needn’t worry about rain washing your product off. If you
have missed the early flowering timing, a fungicide may still be applied 5-7
days following the ideal target and still provide some scab protection. Be
sure to observe label restrictions.
--Alyssa Collins, Extension Field Crops Pathologist, Penn State University
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat in the Eastern Shore of Maryland is finishing up flowering. The risk
for FHB is high. If you haven’t sprayed and you are still within 4-5 days
of flowering, you can still do so. Wheat in the Northern parts is heading
now and will soon start flowering. The FHB risk for this part of the state
is also predicted to be high, and the farmers should be prepared to spray
fungicides on their wheat when it flowers (50% of the main tillers showing
yellow anthers). The fungicides effective for FHB are Prosaro/ Caramba/
Miravis-Ace. The best stage recommended for spraying fungicides is early
flowering or within 4-5 days of that. These fungicides do not need to be
tank mixed with another product for spraying. The fungicide products should
be applied at the full rate recommended by the manufacturers. Strobilurin
containing fungicides should not be sprayed at this stage. Aerial
application at a rate of 5 gallons per acre or ground application at 15
gallons per acre with 300-350 um droplet size is recommended. Spray nozzles
should be angled at 30°-45° down from horizontal, toward the grain heads,
using forward- and backward mounted nozzles or nozzles with a two
directional spray, such as Twinjet nozzles. There has been no other major
disease being seen anywhere across the state in wheat so far.
--Nidhi Rawat, Small grains Pathologist, University of Maryland
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat in the Eastern Shore of Maryland is finishing up flowering. The risk
for FHB is high. If you haven’t sprayed and you are still within 4-6 days
of flowering, you can still do so. Wheat in the Northern parts is heading
now and will soon start flowering. The FHB risk for this part of the state
is also predicted to be high, and the farmers should be prepared to spray
fungicides on their wheat when it flowers (50% of the main tillers showing
yellow anthers). The fungicides effective for FHB are Prosaro/ Caramba/
Miravis-Ace. The best stage recommended for spraying fungicides is early
flowering or within 4-5 days of that. These fungicides do not need to be
tank mixed with another product for spraying. The fungicide products should
be applied at the full rate recommended by the manufacturers. Strobilurin
containing fungicides should not be sprayed at this stage. Aerial
application at a rate of 5 gallons per acre or ground application at 15
gallons per acre with 300-350 um droplet size is recommended. Spray nozzles
should be angled at 30°-45° down from horizontal, toward the grain heads,
using forward- and backward mounted nozzles or nozzles with a two
directional spray, such as Twinjet nozzles. There has been no other major
disease being seen anywhere across the state in wheat so far.
--Nidhi Rawat, Small grains Pathologist, University of Maryland
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org
Wheat that is flowering now or in the next several days in southern PA
should be sprayed for scab if at all possible. Weather conditions are
conducive for infection in most regions of the state. If spraying at early
flowering is not possible, a fungicide application up to 6 days later will
provide some suppression of the disease. Keep an eye on your label to
understand post-harvest interval restrictions.
--Alyssa Collins, Extension Field Crops Pathologist, Penn State University
For more details, go to the FHB Risk assessment tool at
http://www.wheatscab.psu.edu
For the latest news and updates from the U.S. Wheat & Barley Scab
Initiative, go to https://www.scabusa.org